Author: Bob in Michigan May 8, 2008 at 00:54:24 from 69.29.243.248
What are the torque specs for ARP main studs on a 4-bolt main small block Chevy, I assume it would be the same for a 350 or a 400 block. Somebody told me 90 ft.lb. but that seems like a lot. I got a 400 block from a guy and it was already studded and he must have put loctite on the studs because I tried to back one out and it's STUCK. The main bores are definitely undersize so I have to have the main bores honed to get them up to spec. Also what are the specs for ARP head studs for a SBC -- any difference between the long and short studs or are they all the same? Thanks.
Post Followup
Note: Follow-ups should only be used for information of interest to all viewers. For other inquiries or personal communication please send an email if possible or use other contact information provided.
When you return to the board you will need to do a REFRESH or RELOAD to see your followup.
