Author: Jim Honney May 8, 2008 at 12:42:09 from 24.93.147.93 in reply to: Re: Torque specs for ARP main studs in a 4-bolt SBC posted by Frank on May 8, 2008 at 10:33:19
I thought 90 lbs. sounded a little high for 7/16" studs. The studs should screw into the block by hand.
Post Followup
Note: Follow-ups should only be used for information of interest to all viewers. For other inquiries or personal communication please send an email if possible or use other contact information provided.
When you return to the board you will need to do a REFRESH or RELOAD to see your followup.
