Author: Frank Dragotta October 16, 2011 at 11:50:02 from 184.108.40.206
I have for sale a 200"wb chrome moly chassis Front Engine Dragster project. It will certify down to 7.50 ET. It is nearly finished and comes with many extra parts. it is powered by a 355 SBC with on gas with a 750cfm Edelbroock carb, a TCI Turbo 350 with a trans Brake, a 5,000 stall TCI converter, Strange 2pc quick release coupler Ford 9" Rear with a Strange Nodular Center Section, 4.11 Gears, Moser 35 spline axles, moser spool, 5/8" wheel studs. It has Rack and pinion steering. As I said it needs completion. (Brakes, Plumbing, Wiring a body and a driver) the true value of what I have is easily well over $12,000 at today's prices, not including my labor.
As far as the car, really other than plumbing, electrical, Brake Rotors, Calipers, and Caliper mounts and braided brake line. I have everything to finish the car. I do have a nice CNC Master Cylinder already. It will certify down to 7.50 ET. and exceeds SFI requirements. If you want a certification sticker, I would have the area inspector come to my home and certify it as I do not have a trailer. I would also have to pass the cost on to the purchaser.
I have started on the body and seat has been formed but I still need to install Duez Tabs and fasteners. to hold everything in place. Need to mount the Gas Pedal, Master Cylinder and pedal, Chute lever, Gauges, switches, fuel cells etc. I have everything to run the car. As I said it is a work in progress, and will need completion but the hard work is done and it will make someone a fun car to run.
I will sell the car as is with everything I have for $8,000 cash
I will sell the car as is without the Motor, Trans & Center Section for $4,500 cash
I will sell the car as is just the Chassis, Steering and Spindles, with a bare housing no center section or axles for $3,500 cash
I am located in Lancaster NY 14086 I have plenty of pics Call or text me at 716-474-5627 Thanks….Frank