Author: Nate February 25, 2012 at 02:28:53 from 184.108.40.206
Have an Indy blower manifold for the low-deck Mopar big-block wedge engines. This is one heck of a manifold! Has a burst panel installed.
Indy gets at least a grand for these intakes, and that's without the burst panel which costs an additional $300 to have a blower shop install.
Sell for $750... this is considerably less than it would cost you to run out and buy this new. I might add... there are NOT many of these floating around out there, so here's your chance.
This intake could also be used on a 394 Olds if custom adapter plates were used... and I promise you, this is the most killer intake you could run on a blown 394 Olds... taller intake, angled floor, straighter shot into the head ports, you get the picture...