Author: Lou March 1, 2009 at 18:00:17 from 68.54.149.80 in reply to: Cleveland posted by Peter Smith on February 4, 2009 at 16:30:40
Hi Pete, I have a cleveland crank that is supposed to make a 366ci cleveland. I do not know too many details about it other than it might use 360 mopar rods. I should be able to contact the guy that built it if you,re intrested. as far as i know it was never used since it was built.
Post Followup
Note: Follow-ups should only be used for information of interest to all viewers. For other inquiries or personal communication please send an email if possible or use other contact information provided.
When you return to the board you will need to do a REFRESH or RELOAD to see your followup.
