Author: Bill July 4, 2009 at 12:45:51 from 208.127.122.123 in reply to: WTB Mark IV 454 block posted by Maury Tiehen on June 13, 2009 at 12:29:15
I have a std bore Mark IV block, 4 bolt mains, should clean at .030 max. its the 445 casting and is already cleaned. 714 865 1909
Post Followup
Note: Follow-ups should only be used for information of interest to all viewers. For other inquiries or personal communication please send an email if possible or use other contact information provided.
When you return to the board you will need to do a REFRESH or RELOAD to see your followup.
